Quad/Special Monitor Arms

Our single monitor arms will all take any monitor with VESA holes in the back of it either 75mm or 100mm apart arranged as four in a square pattern.

There are two main technologies within the range:

Fixed articulating monitor arms. These cannot easily be height adjusted when in use but depending on the set-up the monitor can be swung towards or away from the user. The monitor can also be mounted portrait and landscape.
Gas-sprung monitor arms. This type of monitor arm has a gas spring which is adjusted so that the monitor is almost weightless meaning that it can be easily height adjusted with a gentle movement. Further to this it can also be swung towards and away from the user making it very adaptable and very easy to optimise the monitor position. For hot desks this is almost an essential piece of equipment.

Our monitor arms are also sub-divided by weight capacity:

6.5Kg for lighter monitors

8kg for heavyweight monitors

15Kg for monitors plus a thin client mounted behind or all in one computers. In this case the use SSA1011 and combine it with the monitor arm to give a very neat solution to installing thin clients in your office or home.

Finally keep an eye out for our USB equipped monitor arms. These have twin USB sockets with a USB fly lead which can then be plugged into your CPU or thin client providing easy access and charging at desk-top level.

Important Note! : Many curved monitor manufacturers are now supplying VESA adapters which space the monitor a long way from the monitor arm. This can cause problems with the joint at the top of the monitor arm which is not designed to withstand the level of torque load this applies. As all the manufacturers have different designs we cannot guarantee that if the monitor is not directly attached to our VESA plate that this joint will be strong enough to hold the monitor.